On the each Jira issue details page you should see an additional quick-add button “Start / Stop timer“ inside of issue content bar (see the screenshot below).
The actual section with timer and other configuration options will appear after you click the “Start / Stop timer” button (see the screenshot below) and it will be visible for the next time you come back to the issue again.
Before you can start tracking your time and manage time entries - you should add your Clockify API token.
Navigate to any Jira issue details page and find the “Clockify Integration for Jira” section. If you cannot find it, please navigate and read the “After installation” part of the documentation.
Click the “Manage token” button which is located on the right side of the application (see the screenshot below).
Follow the short instructions on the loaded form, add your API token and you are ready to go (see the screenshot below).
Navigate to any Jira issue details page and find the “Clockify Integration for Jira” section. If you cannot find it, please navigate and read the “After installation” part of the documentation.
Click the “Manage token” button which is located on the right side of the application (see the screenshot below).
Click the “Remove token” button, on the loaded form, to delete your API token (see the screenshot below).
You just need to select your timer options once, then start the timer and all your selection preferences will be saved and preset automatically. So the next time you load your Jira issue details page you can just click the “Start” button without extra actions. The preference mapping is Jira user-project related.
Please follow those steps to run a timer:
Navigate to any Jira issue details page and find the “Clockify Integration for Jira” section. If you cannot find it, please navigate and read the “After installation” part of the documentation.
On the loaded form you can adjust the description of the time entry, by default it will be set as a Jira issue summary. The issue key will be added as a prefix automatically. So the final description will be look like: “RET-12 issue-summary-here”, where “RET-12” is Jira issue key.
By clicking the “Timer options” button you will see an additional section with different timer configurations like: workspaces, projects (clients), tasks, tags, billable, etc… See the screenshot below
Click the “Start” button to run a timer with selected options.
To stop the timer, just navigate to the needed Jira issue details page, find “Clockify Integration for Jira” section and click the button with running counter on it (see the screenshot below).
You can stop timer in any loaded Jira issue details page, but related Jira work-log items will be added to the issue where timer was started or to the issue which is detected by Jira issue key specified in the time entry description. If none of the cases happens, the timer will be stopped without any Jira work-log items operations.
You can start a timer from any Clockify application and stop it in Jira issue. In the description of time entry you have to specify a Jira issue key like: RET-12 timer summary is here, where RET-12 is a Jira issue key.
You can start a timer in any Jira issue and stop it later with one of the Clockify applications you prefer to use. The Jira issue work-log item will be added automatically.
* Webhook setup is required.
You can start/stop a timer in one of the Clockify applications if you prefer to manage all in one place. In your time entry description, you have to specify a Jira issue key like - RET-12 timer summary is here, where RET-12 is a Jira issue key. Plugin will add the Jira issue work-log item automatically.
Current use case works only for users who have registered their Clockify API token in the add-on app.
* Webhook setup is required.
You can add your time entry manually in Clockify web/desktop application and specify a Jira issue key in the description, for example - RET-12 timer summary is here, where RET-12 is a Jira issue key. Plugin will add the Jira issue work-log item automatically.
Current use case works only for users who have registered their Clockify API token in the add-on app.
* Webhook setup is required.
The application tries to keep data sync between Jira (issue work-log items) and Clockify (time entries). So when you update your time entry in the Clockify web/desktop application, the changes automatically apply to existing "mapped" issue work-log items.
* Webhook setup is required
The application tries to keep data in sync between Jira (issue work-log items) and Clockify (time entries). So when you delete your time entry in the Clockify web/desktop application, the add-on tries to find a mapped Jira issue work-log item and sets the duration equal to 0. It also adds "out of sync with Clockify" to the item description.
* Webhook setup is required
For each running timer that we stop (in Jira or Clockify apps), the add-on application validates and adds a Jira issue work-log item (description, start date-time, duration) automatically, with the values based on the terminated entry, and behalf of Jira user who stopped it.
As a manager that would like to track the recent activities of your team for particular Jira issues you don’t need to add any Clockify API tokens. Just load a needed Jira issue details page, navigate to the “Clockify integration for Jira” section, click the “User activities“ button and check entries (see screenshot below)
To disable the application from any Jira issue details page for specific just follow those steps:
Navigate to the Jira project and click the “Project settings” item which is located on the left sidebar menu (see screenshot below).
On the loaded page, in the same left sidebar menu, navigate and click the “Apps” drop-down. On the opened list find and click the “Clockify integration for Jira“ link (see screenshot below)
On the loaded page toggle the “Disable” button to enable / disable plugin (see screenshot below)
You can configure additional timer option assignments between Jira and Clockify, so when you load Jira issue details page and after want to start a timer, enabled options will automatically preassigne needed values for you. To enable/disable it - just follow those steps:
Navigate to the Jira project and click the “Project settings” item which is located on the left sidebar menu (see screenshot below).
On the loaded page, in the same left sidebar menu, navigate and click the “Apps” drop-down. On the opened list find and click the “Clockify integration for Jira“ link (see screenshot below)
On the loaded page switch to the “Timer options” tab and enable/disable needed for you option (see screenshot below)
Automatically adds to the timer options Clockify tags, which have the same names as Jira labels. In case the item does not exist - it will be created automatically.
Automatically adds to the timer options Clockify tag, which has the same name as Jira issue type. In case the item does not exist - it will be created automatically.
Automatically selects in the timer options Clockify project, which has the same name as Jira project. In case the item does not exist - it will be created automatically.
Automatically adds to the timer options Clockify task, which has the same name as Jira issue key. In case the item does not exist - it will be created automatically.
Automatically adds to the timer options Clockify task, which has the same name as Jira issue summary. In case the item does not exist - it will be created automatically.
To support different scenarios for timer and time entry (please read sections above marked with *) - you should set up Clockify webhooks. Just follow this short video tutorial below and add 5 webhook events:
Timer started (anyone)
Timer stopped (anyone)
Time entry updated (anyone)
Time entry deleted (anyone)
Time entry created manually (anyone)
After successful setup, you can use any suitable approach.
Feature is available only for |
It's much easier to realize if someone is working on some issue (a Clockify timer is running) just by observing a timer badge on the issue card on Jira board, rather than opening each time Jira issue details page and track users activity section. After you enable timer badge option and someone will start a timer all other users can see an additional badge on the issue card like it shown on the image below.
Please note that it takes few seconds for Jira to show/hide badge on the card
Please note that it takes few seconds for Jira to show/hide badge on the card
Navigate to the Jira project and click the “Project settings” item which is located on the left sidebar menu.
On the loaded page, in the same left sidebar menu, navigate and click the “Apps” drop-down. On the opened list find and click the “Clockify integration for Jira“ link.
After the page is loaded - find and enable “Enable timer badge on board card“ option. The special custom field will be created and assigned to needed screens automatically. Please see the image below how it should look like.
Please remember the name of created custom field. In our test example it’s - “RET: Clockify timer badge”
Please remember the name of created custom field. In our test example it’s - “RET: Clockify timer badge”
Navigate to the board where you would like to have timer badge and open board configuration page, see image below.
On the loaded page select “Card layout“ tab and navigate to the “Active sprints“ section.
Add a custom field that was created for you when you enabled the timer badge option (in our test example it’s - “RET: Clockify timer badge”) and save changes.
You can manage an automation rules that will start/stop your Clockify timer each time you change your Jira issue status.
For example - when you set the status of your Jira issue to the (by selecting the value from the drop-down list or by drag and dropping an issue inside the Jira project board to the needed column) the Clockify timer will be started automatically for the user who has triggered the “status change” operation and which has a connection with Jira for Clockify plugin.
Next steps describe how you can configure those rules:
Navigate to the Jira project and click the “Project settings” item which is located on the left sidebar menu (see screenshot below).
On the loaded page, in the same left sidebar menu, navigate and click the “Apps” drop-down. On the opened list find and click the “Clockify for Jira“ link
On the loaded page find and click the “Timer automation“ tab (see screenshot below)
In the form that will appear select needed values (statuses) by which Clockify timer will be started or stopped automatically and click “Save” button to save your changes.